Gujarati Vikram Samvat calendar

Gujarati Vikram Samvat calendar: tithis, Sud and Vad, lunar months, intercalary months, and two Gregorian date converters — a traditional model and a modern astronomical Panchang.

This page exists due to the efforts of the following people:

Timur

Timur

Created: 2026-11-21 12:44:06, Last updated: 2026-11-21 14:32:32
Creative Commons Attribution/Share-Alike License 3.0 (Unported)

This content is licensed under Creative Commons Attribution/Share-Alike License 3.0 (Unported). That means you may freely redistribute or modify this content under the same license conditions and must attribute the original author by placing a hyperlink from your site to this work https://planetcalc.com/11026/. Also, please do not modify any references to the original work (if any) contained in this content.

This article started with a request for Gregorian-to-Gujarati date conversion. The examples were 24 October 2022 — Aaso Vad 14, VS 2078, and 26 October 2022 — Kartak Sud 1, VS 2079. The Gujarati New Year begins between these dates.

Below are two calculators: one uses the traditional Hindu calendrical model, and the other uses modern astronomical positions of the Sun and Moon. But first, let us look at what the month, Sud, and Vad mean, and why a lunar day can be repeated.

Solar, lunar, and lunisolar calendars

The familiar Gregorian calendar ties its year to the cycle of seasons. A common year has 365 days, a leap year has 366, and the months contain from 28 to 31 days. This grid is not linked to the phases of the Moon.

A lunar calendar, by contrast, follows the phases of the Moon. One lunar month from new moon to new moon lasts about 29.53 days on average. Twelve such months amount to approximately 354 days, about 11 days fewer than a solar year. Without a correction, lunar months gradually drift through the seasons.

A lunisolar calendar combines both tasks: the months remain lunar, while the Sun is used to keep them aligned with the seasons. An entire intercalary month is added from time to time. Therefore, the Indian New Year is not fixed to one Gregorian date, but neither does it wander through the whole solar year like the beginning of a purely lunar year.

The Gujarati calendar is a lunisolar calendar of this kind.1

Tithi — a lunar day that is not a 24-hour day

A tithi is the interval during which the angular separation between the Moon and the Sun increases by 12 degrees. The tithi number is calculated as follows:

N=\left\lfloor\frac{(\lambda_L-\lambda_S)\bmod 360^\circ}{12^\circ}\right\rfloor+1,

where \lambda_L and \lambda_S are the geocentric ecliptic longitudes of the Moon and the Sun, \bmod 360^\circ reduces their difference to the interval from 0 to 360 degrees, and \lfloor\ \rfloor denotes rounding down.

A complete cycle contains 30 tithis. One tithi lasts about 23 hours 37 minutes on average, but the Moon does not move uniformly, so the actual duration varies.

What does this mean in practice? A tithi does not have to fit neatly between one midnight and the next. It may begin in the morning and end at night, with the next tithi beginning on the same civil day. The Moon, of course, knows nothing about our calendar grid.

A calendar date is labelled using the tithi in effect at local sunrise. This leads to two interesting cases:

  1. Repeated tithi. The same tithi is in effect at two consecutive sunrises. Two civil days receive the same lunar date.
  2. Skipped tithi. A short tithi begins and ends between two sunrises. Its number is absent from the sequence of civil dates.

This is why the calculators below include a “Repeated lunar day” option for reverse conversion. Without it, two different Gregorian days sometimes cannot be distinguished.

Sud and Vad — the two fortnights

A month is divided into two pakshas, or fortnights of 15 tithis each:

  1. Sud, or Shukla Paksha, is the bright fortnight from new moon to full moon. The visible lunar disc is waxing.
  2. Vad, or Krishna Paksha, is the dark fortnight from full moon to the next new moon. The visible lunar disc is waning.

The last tithi of the bright fortnight, Sud 15, is called Punam, the full moon. The last tithi of the dark fortnight, Vad 15, is called Amas, the new moon.

Thus, converting the continuous tithi number N from 1 to 30 into Gujarati notation is straightforward:

for N\leq15 — Sud N;

for N>15 — Vad (N − 15).

For example, tithi 29 is Vad 14, and tithi 30 is Vad 15, or Amas.

Months and their Gujarati names

Gujarati months are amanta: each month ends at new moon. The sequence below starts with Kartak because the Gujarati Vikram Samvat year begins with this month.

Gujarati name Generic name
Kartak Kartika
Magshar Margashirsha
Posh Pausha
Maha Magha
Fagan Phalguna
Chaitra Chaitra
Vaishakh Vaishakha
Jeth Jyeshtha
Ashadh Ashadha
Shravan Shravana
Bhadarvo Bhadrapada
Aaso Ashvina

The names look different, but these are not two sets of parallel months. They are regional forms of the same lunar months.

Why an intercalary month is needed

The position of the Sun keeps the lunar months close to their seasons. An important event is Sankranti, the Sun's entry into a new sign of the sidereal zodiac.

Usually, one Sankranti occurs between two new moons. But a lunar month is slightly shorter than a solar month, and sometimes no Sankranti occurs between two new moons. The month name is then repeated. The first of the two same-named months is called Adhik, the intercalary month.

The reverse situation is also possible, though rare: two Sankrantis occur between two new moons. One lunar month is then omitted from the count; this is Kshaya, a suppressed month.

That is why simply adding 29 or 30 days to a Gregorian date does not work. First, the new moons and the Sun's position must be calculated; then the month name can be determined and checked for intercalation. The calculators provide a separate “Adhik” option for this purpose.

Vikram Samvat, Chaitra, and Kartika

Vikram Samvat (VS) is a calendar era used in India. However, different regions may start a year bearing the Vikram Samvat number at different times.

The variant beginning on Chaitra Sud 1 is common in general Hindu calendars. Gujarat uses the Kartikadi year, which begins on Kartak Sud 1, the first tithi of the bright fortnight of Kartak. This is the next lunar day after Aaso Amas, the new moon associated with Diwali. Consequently, the Gujarati New Year, Bestu Varas, follows Diwali.2

Consider the example from the request. In the Chaitra-based model, both 24 and 26 October 2022 belong to VS 2079. In the Gujarati count, 24 October is still in VS 2078. 25 October is Aaso Vad 15, Amas, and 26 October brings Kartak Sud 1 and the beginning of VS 2079.

If Y_C is the Chaitra-based Vikram Samvat year and Y_K is the Gujarati Kartikadi year, then

Y_K=Y_C-1 — from Chaitra through Aaso;

Y_K=Y_C — from Kartak through Fagan.

Both calculators show both year numbers. This removes the temptation to add 56 or 57 mechanically to the Gregorian year and hope that the lunar month will somehow take care of itself.

Traditional model

The calculator below uses traditional Hindu formulae for the motion of the Sun and Moon and the Orissa rule for determining the lunar date at sunrise. The same computational engine is used by the Gregorian date to Hindu true lunisolar calendar calculator. Gujarati month names and the Kartikadi year conversion are applied to its result.3

PLANETCALC, Gujarati Vikram Samvat calendar — traditional model

Gujarati Vikram Samvat calendar — traditional model

Date in the commonly used Gregorian calendar.
The Gujarati year beginning on Kartak Sud 1.
The month sequence begins with Kartak.
Sud is the bright fortnight; Vad is the dark fortnight.
A number from 1 to 15; Sud 15 is Punam, Vad 15 is Amas.
Select only for the repeated intercalary month.
Select for the first of two civil days with the same tithi at sunrise.
Gujarati date
 
Vikram Samvat year (Kartika)
 
Equivalent Vikram Samvat year (Chaitra)
 
Month
 
Month number from Chaitra
 
Paksha
 
Tithi within the paksha
 
Intercalary month
 
Repeated lunar day
 
Gregorian date
 
Start of the current year — Kartak Sud 1
 

This version is useful for studying traditional calendrical calculations, comparing the result with other Indian calendars on the site, and reproducing this particular historical model. It does not claim to agree with every contemporary printed Gujarati Panchang.

Modern astronomical Panchang

A Panchang is an Indian astronomical calendar and almanac. The second calculator uses modern geocentric positions of the Sun and Moon, determines the tithi at sunrise, and finds the month name from the Sun's position at new moon.4

PLANETCALC, Gujarati Vikram Samvat calendar — astronomical Panchang

Gujarati Vikram Samvat calendar — astronomical Panchang

Date in the commonly used Gregorian calendar.
The Gujarati year beginning on Kartak Sud 1.
The month sequence begins with Kartak.
Sud is the bright fortnight; Vad is the dark fortnight.
A number from 1 to 15; Sud 15 is Punam, Vad 15 is Amas.
Select only for the repeated intercalary month.
Select for the first of two civil days with the same tithi at sunrise.
Gujarati date
 
Vikram Samvat year (Kartika)
 
Equivalent Vikram Samvat year (Chaitra)
 
Month
 
Month number from Chaitra
 
Paksha
 
Tithi within the paksha
 
Intercalary month
 
Repeated lunar day
 
Gregorian date
 
Start of the current year — Kartak Sud 1
 

The following settings are fixed in advance:

  1. Location: Ahmedabad, Gujarat.
  2. Moment: local sunrise, using the Sun's apparent upper limb and standard atmospheric refraction.
  3. Ayanamsha: Lahiri, the correction from the tropical zodiac to the sidereal zodiac used in many contemporary Panchangs.
  4. Months: amanta, with Adhik and Kshaya determined from new moons and Sankrantis.

This version is more suitable for practical date conversion and comparison with contemporary Panchangs for Ahmedabad. Sunrise occurs at a different time in another city, so the result can change near a tithi boundary.

Why the calculators can give different results

Strictly speaking, they are not calculating one identical quantity by two methods of different accuracy. Both the astronomical models and the calendrical conventions differ.

Traditional formulae describe the motion of the luminaries differently from modern ephemerides. The chosen moment also matters: if one tithi ends shortly before sunrise and the next begins shortly afterwards, a small difference in the calculated lunar position can shift the calendar date. The same applies to a new moon near Sankranti and to the identification of an intercalary month.

Festival observance adds another level of complexity: a religious rule may require a tithi not merely at sunrise, but during a particular part of the day. Calendar conversion and the choice of a festival's observance time are related, but not identical, tasks.

Applicability

  1. Choose the traditional-model calculator for consistency with Planetcalc's existing Indian calendars or for studying the classical calculation scheme.
  2. Choose the astronomical calculator for a date according to a contemporary astronomical Panchang for Ahmedabad. Do not transfer its result unconditionally to another city or regional tradition.
  3. Check the special options for reverse conversion. Select “Adhik” for an intercalary month and “Repeated lunar day” for the first of two identical tithis at sunrise. If the specified combination does not exist, the calculator reports an error instead of choosing the nearest day by trial and error.
  4. The supported range is limited. Both calculators accept Gregorian dates from 1600 through 2400 and Vikram Samvat years from 1657 through 2455.
  5. For religious observances, consult a local Panchang. The calculators provide calendar dates under explicitly stated rules; they do not replace regional or religious tradition.

Other Indian solar and lunisolar calendar variants can be found in Indian calendars.


  1. Dershowitz N., Reingold E. M. Indian Calendrical Calculations. Sections on the lunisolar calendar, tithis, and regional rules. Article text. See also Mishra V. K. The Calendars of India, sections 4.5 and 5.2. arXiv. ↩

  2. Shree Swaminarayan Mandir Bhuj. Hindu Calendar Explained. Gujarati months and the year beginning on Kartak Sud 1. Source. Worked Ahmedabad dates: Drik Panchang, Gujarati New Year 2022. ↩

  3. Planetcalc. Gregorian date to Hindu true lunisolar calendar and Indian calendars. ↩

  4. Cross D. Astronomy Engine. Documentation for solar and lunar positions, moon phases, and rise times. Source code and documentation. Sunrise convention for Panchang calculations: Drik Panchang. ↩

URL copied to clipboard
PLANETCALC, Gujarati Vikram Samvat calendar

Comments