Electricity, Work, and Power

This online calculator can help you solve the problems on work done by the current and electric power. It can calculate current, voltage, resistance, work, power and time depending on what variables are known and what are unknown

This page exists due to the efforts of the following people:

Timur

Timur

Created: 2020-03-24 11:01:00, Last updated: 2021-03-07 10:08:05

You can use this online calculator to check the solution of problems for electric power and electrical work. To use it, enter known values and leave unknown values blank. If there are enough data, hit the "Calculate" button, and the calculator finds all unknowns.

Sample problem: The crane consumes a current of 40A from an electrical network with a voltage of 380V. The crane took 3.5 minutes to lift the concrete slab. Find the work that the crane did.

To get the solution, enter 40 into the "Current" field, then enter 380 into the "Voltage" field, then 3.5 into the "Time" field, switching time units to "minutes". After that, click the "Calculate" button. The calculator outputs work in Joules and power in Watts and resistance in Ohms (because it can). Below you can find formulas used for calculations below the calculator.

PLANETCALC, Electricity, Work, and Power

Electricity, Work, and Power

Digits after the decimal point: 2
Current, Amps
 
Voltage, Volts
 
Resistance, Ohms
 
Work, Joules
 
Power, Watts
 
Time, seconds
 

Electrical work and power of electric current

Electrical work is the work done on an electric charge by the electric force. Electric work can be found as the multiplication of quantity of transferred electric charge by electric potential or voltage between endpoints.

A = \Delta q U

From the other side, the electric current is the rate of flow of electric charge past a point over time

I = \frac { \Delta q } { \Delta t }

Hence, electrical work can be expressed as a multiplication of current, voltage, and time

A = IU \Delta t

This, by the way, gives us that 1Joule = 1Volt·1Amper·1second

Since Ohm's law gives us this equation

I = \frac{U}{R}

We can also express electrical work like this:

A = I^2R \Delta t \\ A = \frac{U^2}{R} \Delta t

Since power is the rate of doing work per unit of time, we can express electric power as

P = \frac{A}{\Delta t}

And, finally,
P = IU \\ P = I^{2}R \\ P = \frac{U^2}{R}

URL copied to clipboard
PLANETCALC, Electricity, Work, and Power

Comments